Silica Exposure Control Plan for concrete, masonry, and demolition contractors in Rhode Island.
Pre-mob paperwork due and the Silica Exposure Control Plan is the one holding up the badge? Answer ten questions and it is written for the project, not copied from a template.
What GCs in Rhode Island check for
GCs and OSHA inspectors ask for the written plan by name under 29 CFR 1926.1153(g). They look for each task matched to its Table 1 row, the competent person, the housekeeping rules (no dry sweeping or compressed air), and how you keep other trades out of the dust.
Federal OSHA enforces construction safety for private employers in Rhode Island; the plan says which rules apply and applies the stricter one where the state adds to federal OSHA.
- Federal OSHA standards apply to private construction.
- Rhode Island requires OSHA 10 for workers on public construction projects over $100,000.
Nothing in it is boilerplate you have to hunt through: the hazards come from your tasks and equipment, the controls from a library written to 29 CFR 1926.1153 and Table 1.
Nothing here is OSHA-approved, because nothing is. What you get is a plan that names the right people, matches the scope, and is signed by you.
What’s inside
- 1.Purpose and scope
- 2.Tasks involving respirable crystalline silica
- 3.Table 1 task mapping and engineering controls
- 4.Housekeeping methods
- 5.Restricted access and communication
- 6.Competent person
- 7.Medical surveillance and training
- 8.Signatures
One payment of $149. Edit your answers and regenerate as often as you need for 30 days.
Questions from Rhode Island concrete and masonry subs
- Who enforces the silica standard in Rhode Island?
- Private construction in Rhode Island is covered by federal OSHA (Federal OSHA (Providence area office)). The respirable crystalline silica standard for construction applies either way, and the plan is written to 1926.1153(g).
- Do I need air monitoring?
- Not for tasks that match a Table 1 entry and follow its control fully. Tasks outside Table 1 need objective data or exposure monitoring; the plan has a section for those and tells you what it requires.
- Does a silica exposure control plan have to be state-specific in Rhode Island?
- Private construction in Rhode Island is covered by federal OSHA (Federal OSHA (Providence area office)). Your plan is written for the project address, and where Rhode Island has its own rule on the subject the plan says so and applies the stricter requirement.
- Is this OSHA-approved?
- No document is. OSHA and the state programs do not approve written plans; they inspect against them. This plan is prepared from your answers, says so on page one, and you adopt and implement it. That is what a GC's safety director is checking for.
- How long does it take?
- About 15 minutes of questions on your phone, then the documents generate in under two minutes. Word and PDF, English and Spanish, with your logo on the cover.
- What if the GC asks for changes?
- Edit your answers and regenerate as often as you like for 30 days at no charge. Every version stays downloadable. If it is not what you needed, reply to any of our emails within 30 days for a full refund.