Fall Protection Plan for roofing, framing, and steel contractors in Massachusetts.
You need a Fall Protection Plan for a job in Massachusetts. You do not need a consultant, a three-day turnaround, or a Word file from 2014.
What GCs in Massachusetts check for
GCs on roofing, framing, steel, and precast scopes want to see which systems you use where, who the competent person is, how a suspended worker gets down, and the training record. If you plan to use warning lines or a safety monitor, they want the 502(k) reasoning in writing.
Because the project is in Massachusetts, the plan's state section covers what Federal OSHA and local GCs ask about beyond the federal baseline.
- Federal OSHA covers private construction; the Massachusetts state plan covers public employers.
- Massachusetts requires OSHA 10 for workers on public construction projects.
Reviewers check for named people with a basis, hazards matched to scope, and a signature page. All three are built in, written to 29 CFR 1926 Subpart M (.500 to .503).
Competent persons, the nearest hospital, the muster point, and the emergency chain are all in it, because those are the lines a reviewer checks first.
What’s inside
- 1.Purpose and scope
- 2.Qualified and competent persons
- 3.Fall hazards identified for this project
- 4.Fall protection systems in use
- 5.Anchor points and equipment inspection
- 6.Infeasibility narrative (1926.502(k)), when selected
- 7.Rescue plan
- 8.Training
- 9.Signatures
It costs $149, takes about 15 minutes, and comes back in Word and PDF with a Spanish copy.
Questions from Massachusetts roofing and framing subs
- What is the fall protection trigger height in Massachusetts?
- Federal OSHA requires fall protection at 6 feet above a lower level in construction, and Massachusetts follows that baseline. Your GC may require more, and the plan applies the stricter requirement.
- Do I need a qualified person?
- Only for engineered anchorages, horizontal lifelines, or a fall protection plan under 1926.502(k) where guardrails, nets, and harnesses are infeasible. The wizard asks; if you name one, the plan includes the signed 502(k) section.
- Does a fall protection plan have to be state-specific in Massachusetts?
- Private construction in Massachusetts is covered by federal OSHA (Federal OSHA (Braintree and Andover area offices)); the state program covers public employers only. Your plan is written for the project address, and where Massachusetts has its own rule on the subject the plan says so and applies the stricter requirement.
- Is this OSHA-approved?
- No document is. OSHA and the state programs do not approve written plans; they inspect against them. This plan is prepared from your answers, says so on page one, and you adopt and implement it. That is what a GC's safety director is checking for.
- How long does it take?
- About 15 minutes of questions on your phone, then the documents generate in under two minutes. Word and PDF, English and Spanish, with your logo on the cover.
- What if the GC asks for changes?
- Edit your answers and regenerate as often as you like for 30 days at no charge. Every version stays downloadable. If it is not what you needed, reply to any of our emails within 30 days for a full refund.