Site-Specific Safety Plan for subcontractors in Kansas.
Subcontractors in Kansas get asked for a Site-Specific Safety Plan before the first day on site. This one is prepared from your answers in about 15 minutes.
What GCs in Kansas check for
The GC's safety director checks it against the subcontract's safety exhibit before you can badge in: named competent persons with a basis, hazards matched to your scope, an emergency plan with the nearest hospital, a training and orientation section, and a signature page. A corporate manual does not pass; it has to name this project.
Because the project is in Kansas, the plan's state section covers what Federal OSHA and local GCs ask about beyond the federal baseline.
- Federal OSHA standards apply to private construction.
It reads like a plan a safety professional wrote for this job because the structure was written that way, against ANSI A10.33 project structure, OSHA 1926 subparts by hazard, and the USACE A-02 reviewer checklist, before your answers went in.
The sample pages on this site are for a fictional electrical sub; your plan reads the same way with your project, your GC, and your crew.
What’s inside
- 1.Project information
- 2.Responsibilities
- 3.Competent persons
- 4.Hazard analysis by task
- 5.Fall protection
- 6.Electrical safety / LOTO
- 7.Silica and dust
- 8.Emergency action plan
- 9.Training and toolbox talks
- 10.Signatures
It costs $199, takes about 15 minutes, and comes back in Word and PDF with a Spanish copy.
Questions from Kansas subs
- What do GCs in Kansas ask for in a site-specific safety plan?
- The same core elements across Wichita and Kansas City: scope of work, a hazard analysis by task, controls for each hazard, named competent persons, an emergency plan with the nearest hospital, training and orientation, incident reporting, and a signed acceptance page. Federal OSHA standards apply to private construction.
- Is a corporate safety manual enough?
- Usually not. Subcontract safety exhibits ask for a plan written for this project: the project name, the GC, the scope, the site's hazards, and the people on this crew. That is what the plan generates.
- Does a site-specific safety plan have to be state-specific in Kansas?
- Private construction in Kansas is covered by federal OSHA (Federal OSHA (Wichita area office)). Your plan is written for the project address, and where Kansas has its own rule on the subject the plan says so and applies the stricter requirement.
- Is this OSHA-approved?
- No document is. OSHA and the state programs do not approve written plans; they inspect against them. This plan is prepared from your answers, says so on page one, and you adopt and implement it. That is what a GC's safety director is checking for.
- How long does it take?
- About 15 minutes of questions on your phone, then the documents generate in under two minutes. Word and PDF, English and Spanish, with your logo on the cover.
- What if the GC asks for changes?
- Edit your answers and regenerate as often as you like for 30 days at no charge. Every version stays downloadable. If it is not what you needed, reply to any of our emails within 30 days for a full refund.