Site-Specific Safety Plan for subcontractors in Alabama.
You need a Site-Specific Safety Plan for a job in Alabama. You do not need a consultant, a three-day turnaround, or a Word file from 2014.
What GCs in Alabama check for
The GC's safety director checks it against the subcontract's safety exhibit before you can badge in: named competent persons with a basis, hazards matched to your scope, an emergency plan with the nearest hospital, a training and orientation section, and a signature page. A corporate manual does not pass; it has to name this project.
Because the project is in Alabama, the plan's state section covers what Federal OSHA and local GCs ask about beyond the federal baseline.
- Federal OSHA standards apply to private construction.
- Summer heat draws OSHA's heat emphasis inspections on outdoor jobs.
Reviewers check for named people with a basis, hazards matched to scope, and a signature page. All three are built in, written to ANSI A10.33 project structure, OSHA 1926 subparts by hazard, and the USACE A-02 reviewer checklist.
Competent persons, the nearest hospital, the muster point, and the emergency chain are all in it, because those are the lines a reviewer checks first.
What’s inside
- 1.Project information
- 2.Responsibilities
- 3.Competent persons
- 4.Hazard analysis by task
- 5.Fall protection
- 6.Electrical safety / LOTO
- 7.Silica and dust
- 8.Emergency action plan
- 9.Training and toolbox talks
- 10.Signatures
It costs $199, takes about 15 minutes, and comes back in Word and PDF with a Spanish copy.
Questions from Alabama subs
- What do GCs in Alabama ask for in a site-specific safety plan?
- The same core elements across Birmingham and Huntsville: scope of work, a hazard analysis by task, controls for each hazard, named competent persons, an emergency plan with the nearest hospital, training and orientation, incident reporting, and a signed acceptance page. Federal OSHA standards apply to private construction.
- Is a corporate safety manual enough?
- Usually not. Subcontract safety exhibits ask for a plan written for this project: the project name, the GC, the scope, the site's hazards, and the people on this crew. That is what the plan generates.
- Does a site-specific safety plan have to be state-specific in Alabama?
- Private construction in Alabama is covered by federal OSHA (Federal OSHA (Birmingham and Mobile area offices)). Your plan is written for the project address, and where Alabama has its own rule on the subject the plan says so and applies the stricter requirement.
- Is this OSHA-approved?
- No document is. OSHA and the state programs do not approve written plans; they inspect against them. This plan is prepared from your answers, says so on page one, and you adopt and implement it. That is what a GC's safety director is checking for.
- How long does it take?
- About 15 minutes of questions on your phone, then the documents generate in under two minutes. Word and PDF, English and Spanish, with your logo on the cover.
- What if the GC asks for changes?
- Edit your answers and regenerate as often as you like for 30 days at no charge. Every version stays downloadable. If it is not what you needed, reply to any of our emails within 30 days for a full refund.